- ARP Poisoning
- ARP Sniffing
- DHCP Discover
- DHCP Starvation
- LAND Attack
- SNMP Cracking
- SYN Flooding
- TCP Flags Analysis
- TCP ISN Analysis
- TCP Port Scan
To install Habu, simply:
$ pip3 install habu
- Python (3.x),
- Matplotlib (Optional, only needed if you want to make some graphs)
$ sudo habu.arpoison 192.168.1.5 192.168.1.6 Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.6 Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.5 Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.6 Ether / ARP is at 00:c2:c6:30:2c:58 says 192.168.1.5 ...
Note: If you want a full working Man In The Middle attack, you need to enable the packet forwarding on your operating system to act like a router. You can do that using:
echo 1 > /proc/sys/net/ipv4/ip_forward
habu.arpsniff: Discover devices on your LAN capturing ARP packets
This command listen for ARP packets and shows information each device.
Columns: Seconds from last packet | IP | MAC | Vendor
1 192.168.0.1 a4:08:f5:19:17:a4 Sagemcom Broadband SAS 7 192.168.0.2 64:bc:0c:33:e5:57 LG Electronics (Mobile Communications) 2 192.168.0.5 00:c2:c6:30:2c:58 Intel Corporate 6 192.168.0.7 54:f2:01:db:35:58 Samsung Electronics Co.,Ltd
habu.contest: Check your connection capabilities
This command tries to connect to various services and check if you can reach them using your internet connection.
$ habu.contest IP: True DNS: True FTP: True SSH: True HTTP: True HTTPS: True
habu.dhcp_discover: Discover DHCP servers
This command send a DHCP request and shows what devices has replied. Using the ‘-v’ parameter (verbose) you can see all the options (like DNS servers) included on the responses.
$ sudo habu.dhcp_discover Ether / IP / UDP 192.168.0.1:bootps > 192.168.0.5:bootpc / BOOTP / DHCP
habu.dhcp_starvation: Fill the DHCP leases
This command send multiple DHCP requests from forged MAC addresses to fill the DHCP server leases. When all the available network addresses are assigned, the DHCP server don’t send responses. So, some attacks, like DHCP spoofing can be made.
$ sudo habu.dhcp_starvation Ether / IP / UDP 192.168.0.1:bootps > 192.168.0.6:bootpc / BOOTP / DHCP Ether / IP / UDP 192.168.0.1:bootps > 192.168.0.7:bootpc / BOOTP / DHCP Ether / IP / UDP 192.168.0.1:bootps > 192.168.0.8:bootpc / BOOTP / DHCP
habu.eicar: Prints the EICAR test string
This command prints the EICAR test string that can be used to test antimalware engines. More info: http://www.eicar.org/86-0-Intended-use.html
$ habu.eicar X5O!P%@AP[4\XZP54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*
habu.hasher: Computes various hashes with the input data
This command computes various hashes for the input data, that can be a file or a stream.
If the filename is ‘-‘, the data is taken from the standard input (stdin) so, three different variants exists to call this command:
$ habu.hasher README.rst md5 : 375375d9cfb2aacab7c8d1a9afd3d9b7 sha1 : 21c67b9ef44bc24d47eef6adab648ba34662927e $ cat README.rst | habu.hasher - md5 : 375375d9cfb2aacab7c8d1a9afd3d9b7 sha1 : 21c67b9ef44bc24d47eef6adab648ba34662927e $ habu.hasher - < README.rst md5 : 375375d9cfb2aacab7c8d1a9afd3d9b7 sha1 : 21c67b9ef44bc24d47eef6adab648ba34662927e
Note: The output above shows only MD5 and SHA1 to make it short, but the real output includes more algorithms.
You can also specify which algorithm to use. In such case, the output is only the value of the calculated hash:
$ habu.hasher -a md5 README.rst 375375d9cfb2aacab7c8d1a9afd3d9b7
habu.ip: Prints your current public IP
This command prints your current public IP based on the response from https://api.ipify.org.
$ habu.ip 126.96.36.199
habu.isn: Prints the TCP sequence numbers for an IP
This command creates TCP connections and prints the TCP initial sequence numbers for each connections.
$ sudo habu.isn www.portantier.com 1962287220 1800895007 589617930 3393793979 469428558
You can get a graphical representation (needs the matplotlib package) using the ‘-g’ option:
$ sudo habu.isn -g -c 10 www.portantier.com
Note: The above command uses ‘-c’ option to define that 10 connections must be created.
habu.land: Implements the LAND attack
This command implements the LAND attack, that sends packets forging the source IP address to be the same that the destination IP. Also uses the same source and destination port.
The attack is very old, and can be used to make a Denial of Service on old systems, like Windows NT 4.0. More information here: https://en.wikipedia.org/wiki/LAND
sudo habu.land 172.16.0.10 ............
habu.ping: ICMP echo requests
This command implements the classic ‘ping’ with ICMP echo requests.
$ sudo habu.ping 188.8.131.52 IP / ICMP 184.108.40.206 > 192.168.0.5 echo-reply 0 / Padding IP / ICMP 220.127.116.11 > 192.168.0.5 echo-reply 0 / Padding IP / ICMP 18.104.22.168 > 192.168.0.5 echo-reply 0 / Padding IP / ICMP 22.214.171.124 > 192.168.0.5 echo-reply 0 / Padding
habu.snmp_crack: SNMP Community Cracker
This command launches snmp-get queries against an IP, and tells you when finds a valid community string (is a simple SNMP cracker).
The dictionary used is the distributed with the onesixtyone tool (https://github.com/trailofbits/onesixtyone)
$ sudo habu.snmp_crack 126.96.36.199 Community found: private Community found: public
habu.synflood: SYN Flood Attack Implementation
This command launches a lot of TCP connections and keeps them opened. Some very old systems can suffer a Denial of Service with this. More info: https://en.wikipedia.org/wiki/SYN_flood
$ sudo habu.synflood 172.16.0.10 .................
Each dot is a packet sent.
You can use the options ‘-2’ and ‘-3’ to forge the layer 2/3 addresses. If you use them, each connection will be sent from a random layer2 (MAC) and/or layer3 (IP) address.
You can choose the number of connections to create with the option ‘-c’. The default is never stop creating connections.
Note: If you send the packets from your real IP address and you want to keep the connections half-open, you need to setup for firewall to don’t send the RST packets. With habu, you can do this with the following command (only works with Linux+IPTables):
$ sudo habu.firewall --no-rst
You can check the results with “iptables -L -n”, and you will see something like this:
Chain OUTPUT (policy ACCEPT) target prot opt source destination DROP tcp -- 0.0.0.0/0 0.0.0.0/0 tcp flags:0x04/0x04
habu.tcpflags: TCP Flag Fuzzer
This command send TCP packets with different flags and tell you what responses receives.
It can be used to analyze how the different TCP/IP stack implementations and configurations responds to packet with various flag combinations.
$ sudo habu.tcpflags www.portantier.com S -> SA FS -> SA FA -> R SA -> R
By default, the command sends all possible flag combinations. You can specify with flags must ever be present (reducing the quantity of possible combinations), with the option ‘-f’.
Also, you can specify which flags you want to be present on the response packets to show, with the option ‘-r’.
With the next command, you see all the possible combinations that have the FIN (F) flag set and generates a response that contains the RST (R) flag.
$ sudo habu.tcpflags -f F -r R www.portantier.com FPA -> R FSPA -> R FAU -> R